Book Chapters

  1. Ozturk, F., Evis, Z., and Kilic, S., Hot Dip Galvanizing Process, In: Hashmi, M.S.J. (ed.), Comprehensive Materials Finishing, Oxford: Elsevier, 3, 178-190, 2016.

  2. Fahrettin Ozturk, Tanju Deveci, Ebru Gunister, Rodney Rodney J. Simmons, Innovative Instructional Strategies for Teaching Materials Science in Engineering, Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education, IGI Global, ISBN 978-1-4666-8183-5 (hardcover) -- ISBN 978-1-4666-8184-2 (ebook), 100-117, 2015.

Refereed Journals (SCI-SCI Expanded)

  1. Suleyman Kilic, Ilyas Kacar, Fahrettin Ozturk, New Trend in Aerospace Industry: Al-Li Based Alloys, Journal of the Faculty of Engineering and Architecture of Gazi University, (Accepted).

  2. Serkan Toros, Fahrettin Ozturk, 3D Microstructural Finite Element Simulation of Martensitic Transformation of TRIP Steels, Latin American Journal of Solids and Structures, 15(7), 1-13, 2018.

  3. S. Kilic, F. Ozturk, R.C. Picu, Investigation of the Performance of Flow Models for TWIP Steel, J Mater Eng Perform, 27(8), 4364-4371, 2018.

  4. Ilyas Kacar, Ismail Durgun, Fahrettin Ozturk, Rodney J. Simmons, A review of light duty passenger car weight reduction impact on CO2 emission, Int. J. Global Warming, 15 (3), 333-349, 2018.

  5. Z. Hou, J. Sheikh-Ahmad, F. Jarrar, F. Ozturk, Residual Stresses in Dissimilar Friction Stir Welding of AA2024 and AZ31: Experimental and Numerical Study, J. Manuf. Sci. Eng., 140, 051015-051015-10, 2018.

  6. Jiansha Dong, Fahrettin Ozturk, Firas Jarrar, Jamal Y. Sheikh-Ahmad, Numerical Post-Buckling Analysis of Mechanically Lined Corrosion Resistant Alloy Pipes, J. Pressure Vessel Technol, 140, 014502-014502-4, 2018.

  7. Zemin Li, Guangwen Dai, Jing Shi, Firas Jarrar, Fahrettin Ozturk, Jamal Ahmad, Using the Particle Swarm Optimization Method for the Constitutive Modeling of AZ31B, Material Science and Engineering Technology (Mat.-wiss. u. Werkstofftech.), 48, 993–997, 2017.

  8. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, Experimental and finite element analysis of residual stresses in cold tube drawing process with a fixed mandrel for AISI 1010 steel tube, Int J Adv Manuf Technol, 93, 1229-1241, 2017.

  9. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, Effects of process parameters on hot extrusion of hollow tube, Arab J Sci Eng, 42, 2021-2030, 2017.

  10. Suleyman Kilic, Fahrettin Ozturk, Evaluation of formability under different deformation modes for TWIP900 steel, J. Eng. Mater. Technol, 139, 031001-031001-8, 2017.

  11. Tianye Guo, Fahrettin Ozturk, Firas Jarrar, Jamal Y. Sheikh-Ahmad, Analysis of Contact Pressure of Mechanically Lined Pipe by Hydraulic Expansion Process, J. Pressure Vessel Technol, 139, 021212-021212-7, 2017.

  12. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Zafer Evis, Jamal Y. Sheikh-Ahmad, Application of Electric Resistance Heating Method on Titanium Hot Forming at Industrial Scale, Arab J Sci Eng, 41 (11), 4441-4448, 2016.

  13. J.Y. Sheikh-Ahmad, F. Ozturk, F. Jarrar, Z. Evis, Thermal History and Microstructure during Friction Stir Welding of Al-Mg Alloy,  Int J Adv Manuf Technol, 86 (1-4), 1071-1081, 2016.

  14. Suleyman Kilic, Fahrettin Ozturk, Comparison of Performances of Commercial TWIP and DP Advanced High Strength Steels in Automotive Industry, Journal of the Faculty of Engineering and Architecture of Gazi University, 31 (3), 567-578, 2016. 

  15. Ilyas Kacar, Fahrettin Ozturk, Bekir Sami Yilbas, A Review and Current State-of-the-Art of Laser Beam Welding in the Automotive Industry, Lasers in Eng, 33 (4-6), 327-338, 2016.

  16. Aytekin Polat, Mustafa Avsar, Fahrettin Ozturk, Effects of Artificial Aging Temperature and Time on Mechanical Properties and Springback Behaviors of AA6061, Materiali in Tehnologije/Materials and Technology, 49 (4), 487-493, 2015.

  17. S. Kilic, F. Ozturk, T. Sigirtmac, G. Tekin, Effects of pre-strain and temperature on bake hardening of TWIP900CR steel, J Iron Steel Res Int, 22 (4) 361-365, 2015.

  18. Murat Dilmec, Huseyin Selcuk Halkaci, Fahrettin Ozturk, Investigation into reasons for minimum major strain offsetting of forming limit curve obtained with Nakajima test for AA 2024-T4, Journal of the Faculty of Engineering and Architecture of Gazi University, 29 (3), 527-536, 2014.

  19. Mevlut Turkoz, H. Selcuk Halkaci, Osman Yigit, Murat Dilmec, Fahrettin Ozturk, A New Method for Determining Limit Strains of Materials Show Post-Uniform Elongation Behavior, P I Mech Eng B-J Eng, 228 (3), 450-457, 2014.

  20. Umit Kockan, Fahrettin Ozturk, Zafer Evis, Artificial Neural Networks Prediction of Hexagonal Lattice Parameters for Non-stoichiometric Apatites, Materiali in Tehnologije/Materials and Technology, 48 (1), 73-79, 2014.

  21. Murat Dilmec, Huseyin Selcuk Halkaci, Fahrettin Ozturk, Mevlut Turkoz, Effect of Sheet Thickness on Anisotropy and Thickness Distribution for AA 2024-T4, Materiali in Tehnologije/Materials and Technology, 47 (5), 605–610, 2013.

  22. Murat Dilmec, H.Selcuk Halkaci, Fahrettin Ozturk, Haydar Livatyali, Osman Yigit, Effects of sheet thickness and anisotropy on forming limit curves of AA2024-T4, Int J Adv Manuf Technol, 67, 2689-2700, 2013.

  23. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Zafer Evis, Aytekin Polat, Mechanical and Microstructural Evaluations of Hot Formed Titanium Sheets by Electrical Resistance Heating Process, Mat Sci Eng A-Struct, 578, 207-214, 2013.

  24. F. Ozturk, A. Polat, S. Toros, R. C. Picu, Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels, J Iron Steel Res Int, 20 (6) 68-74, 2013.

  25. Dilmec, Murat, Selcuk Halkaci, H., Ozturk, Fahrettin, and Turkoz, Mevlut, Detailed Investigation of Forming Limit Determination Standards for Aluminum Alloys, Journal of Testing and Evaluation41 (1), 1-12, 2013.

  26. S. Toros, A. Polat, F. Ozturk, Formability and Springback Characterization of TRIP800 Advanced High Strength Steel, Mater Design, 41, 298-305, 2012.

  27. S. Toros, M. Alkan, R.E. Ece, F. Ozturk, Effect of Pre-Straining on the Springback Behavior of the AA 5754-0, Materiali in Tehnologije/Materials and Technology, 45 (6), 25-32, 2011.

  28. F. Ozturk, Finite Element Modeling of Two Disk Shrink Fit Assembly and Evaluation of Material Pairs of Disks, P I Mech Eng C-J Mec, 225 (C2),  263-273, 2011.

  29. Serkan Toros, Fahrettin Ozturk, Flow curve prediction of Al-Mg alloys under warm forming conditions at various strain rates by ANN, Appl Soft Comput, 11 (2), 1891-1898, 2011.

  30. Fahrettin Ozturk, Hakan Pekel, Huseyin S. Halkaci, The Effect of Strain Rate Sensitivity on Formability of AA 5754-O at Cold and Warm Temperatures, J Mater Eng Perform, 20 (1), 77-81, 2011.

  31. Catalin R. Picu, Fahrettin Ozturk, E. Esener, Renge Li, Aluminum Alloys with Identical Plastic Flow and Different Strain Rate Sensitivity, Metall Mater Trans A, 41A (13), 3358-3364, 2010.

  32. Ahu Fahriye Acar, Fahrettin Ozturk, Mustafa Bayrak, Effects of Variations in Alloy Content and Machining Parameters on the Strength of the Intermetallic Bonding Between A Diesel Piston and A Ring Carrier, Materiali in Tehnologije/Materials and Technology, 44 (6), 391-395, 2010.

  33. Emre Esener, Fahrettin Ozturk, Mustafa Yenice, An Investigation of Use Biaxial Data in Sheet Metal Forming Simulations, steel research int, 81 (9), 1412-1415, 2010. (It was presented at 13th International Conference on Metal Forming, Sept. 19 - 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan).

  34.  Emrah Uysal, Fahrettin Ozturk, Analysis of Forming Limit Diagrams of DP600 Steel at Various Deformation Speeds,  steel research int, 81 (9), 837-840, 2010. (It was presented at 13th International Conference on Metal Forming, Sept. 19 - 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan).

  35. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Effects of Warm Temperature on Springback Compensation of Titanium Sheet, Mater Manuf Process, 25 (9), 1021-1024, 2010.

  36. F. Ozturk, S. Toros, S. Kilic, Tensile Deformation Behavior of AA5083-H111 at Cold and Warm Temperatures, Int. J. Mat. Res. (formerly Z. Metallkd.), 101 (9), 1172-1179, 2010.

  37. Serkan Toros, Fahrettin Ozturk, Modeling Uniaxial, Temperature and Strain Rate Dependent Behavior of Al-Mg Alloys, Comp Mater Sci, 49 (2), 333–339, 2010.

  38. F. Ozturk, E. Esener, S. Toros, R.C. Picu, Effects of Aging Parameters on Formability of 6061-O Alloy, Mater Design, 31 (10), 4847-4852, 2010.

  39. F. Ozturk, A. Sisman, S. Toros, S. Kilic, R.C. Picu, Influence of Aging Treatment on Mechanical Properties of 6061 Aluminum Alloy, Mater Design, 31 (2), 972-975, 2010.

  40. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Tensile and Springback Behavior of DP600 Advanced High Strength Steel at Warm Temperatures, J Iron Steel Res Int, 16 (6) 41-46, 2009.

  41. F. Ozturk, S. Toros, H. Pekel, Evaluation of Tensile Behavior of 5754 Aluminum-Magnesium Alloy at Cold and Warm Temperature, Mater Sci Tech-Lond, 25 (7), 919-924, 2009.

  42. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Muhammet H Bas, Effects of Cold and Warm Temperatures on Springback of AA 5083-H111, P I Mech Eng B-J Eng, 223 (4), 427-431, 2009.

  43. Fahrettin Ozturk, Serkan Toros, M. Hakan Bas, Suleyman Kilic, Evaluation of Tensile Properties of High Strength Steels at Warm Temperatures and Various Strain Rates, Steel research int. 79 Special Edition Metal Forming Conference 2008, Volume 2, 295-300, 2008.

  44. Serkan Toros, Fahrettin Ozturk, Ilyas Kacar, Review of Warm Forming of Aluminum-Magnesium Alloys, J Mater Process Tech, 207 (1-3), 1-12, 2008.

  45. Zafer Evis, Fahrettin Ozturk, Investigation of Tensile Strength of Hydroxyapatite with Various Porosities by Diametral Strength Test, Mater Sci Tech-Lond, 24 (4), 474-478, 2008.

  46. Mustafa Bayrak, Fahrettin Ozturk, Mehmet Demirezen, Zafer Evis, Tempering Treatment on Material Properties of DIN 41Cr4 and DIN 42CrMo4 Steels, J Mater Eng Perform, 16 (5), 597-600, 2007.

  47. Fahrettin Ozturk and Daeyong Lee, New Methodology for Ductile Fracture Criteria to Predict the Forming Limits, J Mater Eng Perform, 16 (2), 224-228, 2007.

  48. Fahrettin Ozturk and Daeyong Lee, Experimental and Numerical Analysis of Out-of-Plane Formability Test, J. Mater. Process. Tech, 170 (1-2), 247-253, 2005.

  49. R.C. Picu, G. Vincze, F Ozturk, J.J. Gracio, F. Barlat, and A.M. Maniatty, Strain Rate Sensitivity of the Commercial Aluminum Alloy AA5182-O, Mat Sci Eng A-Struct, 390 (1-2), 334-343, 2005.

  50. Fahrettin Ozturk and Daeyong Lee, Analysis of Forming Limits Using Ductile Fracture Criteria, J. Mater. Process, Tech. 147 (3), 397-404, 2004.

International Journals

  1. Guangwen Dai, Firas Jarrar, Fahrettin Ozturk, and Jamal Sheikh-Ahmad, On the Effect of the Complexity of the Constitutive Model in Simulating Superplastic Forming, Defect and Diffusion Forum, 385, 379-384, 2018. (It was presented at the 13th International Conference on Superplasticity in Advanced Materials (ICSAM 2018), August 19-22, 2018, St. Petersburg, Russia.)

  2. Kun Li, Firas Jarrar, Jamal Sheikh-Ahmad, Fahrettin Ozturk, Using coupled Eulerian Lagrangian formulation for accurate modeling of the friction stir welding process, Procedia Engineering, 207, 574-579, 2017. (It was presented at the 12th International Conference on Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom).

  3. Nuha Juneidi, Rania Asha, Firas Jarrar, Fahrettin Ozturk, Design for Manufacturing of an Aluminum Superplastic AA5083 Alloy Plate-fin Heat Exchanger, Journal of Materials Science Research, 5 (2), 115-121, 2016. (It was presented at Advances in Materials and Processing Technology (AMPT2014), Atlantis, The Palm - November 17-20, 2014, Dubai, UAE).

  4. Fahrettin Ozturk, Prediction of forming limit diagram using Marciniak–Kuczynski and Swift-Hill models via yield criteria for TRIP800, Advances in Materials and Processing Technologies, 1, 3-4, 619-625, 2016. (It was presented at Advances in Materials and Processing Technology (AMPT2014), Atlantis, The Palm - November 17-20, 2014, Dubai, UAE).

  5. Fahrettin Ozturk, Tuncay Bayrak, The Academicians’ Perspective on the Challenges Facing Higher Education in Turkey, Procedia - Social and Behavioral Sciences, 195, 202-209, 2015. (It was presented at INNOVATION ISTANBUL 2015, World Conference on Technology, Innovation and Entrepreneurship, Istanbul University, May 28-30, 2015, Istanbul, Turkey).

  6. Ilyas Kacar, Fahrettin Ozturk, Firas Jarrar, Defects and Remedies in Stamping of Advanced High Strength Steels, Journal of Modern Mechanical Engineering and Technology, 1, 68-74, 2014. (It was presented at The 16th International Conference on Machine Design and Production, June 30-July 03 2014, Izmir, Turkey).

  7. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Effects of Anisotropic Yield Functions on Prediction of Forming Limit Diagrams of DP600 Advanced High Strength Steel, Procedia Engineering, 81, 760-765, 2014. (It was presented at 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan).   

  8. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Ilyas Kacar, Evaluation of Anisotropy by Two Different Tests for TRIP800 Steel, Key Engineering Materials, 622-623, 1139-1144, 2014. (15th International Conference on Metal Forming 2014, September 21-24, 2014, Palermo, Italy).

  9.  S. Toros, F. Ozturk, M. Kaya, Modeling Uniaxial, Temperature, and Strain Rate Dependent Behavior of AZ31 Alloy by Softening Model, Key Engineering Materials, 473, 624-630, 2011. (It was presented at 14th International Conference on Sheet Metal, Katholieke Universiteit Leuven, April 18, 2011 - April 20, 2011, Leuven, Belgium).

  10. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Assessment of Electrical Resistance Heating for Hot Formability of Ti-6Al-4V Alloy Sheet, Key Engineering Materials, 473, 130-136, 2011. It was presented at 14th International Conference on Sheet Metal, Katholieke Universiteit Leuven, April 18, 2011 - April 20, 2011, Leuven, Belgium).

  11. Fahrettin Ozturk, Zafer Evis, Serkan Toros, Finite Element Simulation of Diametral Strength Test of Hydroxyapatite, AIP Conference Proceedings, 1315, 259-264, 2010. (It was presented at Advances in Materials and Processing Technologies 2010, (AMPT2010), 24-27 October, 2010, Paris, France)

  12. Serkan Toros, Suleyman Kilic, Fahrettin Ozturk, The Effects of Material Thickness and Deformation Speed on Springback Behavior of DP600 Steel, Advanced Materials Research, 264-265, 636-645, 2011. (It was presented at Advances in Materials and Processing Technologies 2009 (AMPT2009), 26-29 October, 2009, Kuala Lumpur, Malaysia).

  13. F. Ozturk, M. A. Arslan, Analysis of Temperature Distribution on Warm Forming of Aluminum-Magnesium alloy, Advanced Materials Research, 264-265, 329-336, 2011. (It was presented at Advances in Materials and Processing Technologies 2009 (AMPT2009), 26-29 October, 2009, Kuala Lumpur, Malaysia).

  14. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Evaluation of Tensile Properties of 5052 Type Aluminum-Magnesium Alloy at Warm Temperatures, Archives of Materials Science and Engineering, 34 (2), 95-98, 2008. (It was presented at 12th International Materials Symposium, 15-17 October 2008, Denizli, Turkey).


National Refereed Journals

  1. Suleyman Kilic, Ilyas Kacar, Fahrettin Ozturk, Serkan Toros, Effect of Different Optimization Methods on the Estimations of Yld2000 Yield Criterion Coefficients, Omer Halisdemir University Journal of Engineering Sciences, (Accepted)

  2. Jabbar Gattmah1, Fahrettin Ozturk, Sadettin Orhan, Effect of the process parameters on cold tube drawing with a fixed plug using finite element analysis for AISI 1010 steel, Sakarya University Journal of Science, 21 (5), 886-892, 2017.

  3. Murat Dilmec, Fahrettin Ozturk, Huseyin Selcuk Halkaci, Determination of Thickness Distributions of Sheet Metal Parts with 3D Scanning Method, Düzce University Journal of Science and Technology, 5, 477-484, 2017.   

  4. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Improvement of Softening Model for Ti-6Al-4V Alloy Having a High Softening Tendency at Elevated Temperatures, Electronic Journal of Machine Technologies, 13 (2), 29-37, 2016.

  5. Yusuf Sahin, M. Hakan Bas, Fahrettin Ozturk, Suleyman Kılıc, Ductility Measurement of a Material by Image Processing, Nigde University, Journal of Engineering Sciences, 2 (2), 34-42, 2013. (In Turkish)

  6. Fahrettin Ozturk, Ilyas Kacar, Investigation of Magnesium Alloys and Their Applications, Nigde University Journal of Engineering Sciences, 1 (1), 12-20, 2012. (In Turkish)

  7. Fahrettin Ozturk, Tse-Chien Woo, Simulations of Interference and Interfacial Pressure for Three Disk Shrink Fit Assembly, GU J Sci, 23 (2)233-236, 2010.

  8. Suleyman KilicFahrettin Ozturk, Serkan Toros, Investigation of Mechanical Properties and Springback Behaviors of DP600 Steel, Journal of Machine Design and Manufacturing 11 (1), 40-45, 2009. (In Turkish).

  9. Fahrettin Ozturk, Serkan Toros, Emre Esener, Emrah Uysal, Investigation of High Strength Steels Usage in Automotive Industry, The Chamber of Mechanical Engineers, Engineer and Machine, 50 (596), 44-49, 2009. (In Turkish) (It was presented at Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Bursa Branch. XI. Automotive Symposium. 8-9 May 2007, Bursa, Turkey. (In Turkish).

  10. Toros S., Ece E.R., Ozturk F., Alkan M., The Investigation of Prestraining on Springback Behavior of 5754-O Al-Mg Alloy Experimentally and Finite Element Model, Electronic Journal of Machine Technologies, 2009, 6 (3), 1-9. (In Turkish).

  11. Ahu Fahriye Acar, Fahrettin Ozturk, Mustafa Bayrak, Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers, Engineer and Machine, 49 (582), 10-16, 2008. (In Turkish) ((It was presented at Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Konya Branch. IV. Machine Design and Manufacturing Technologies Congress. 24-25 November 2007, Konya, Turkey. (In Turkish).

  12. Erkan Toros, Serkan Toros, Fahrettin Ozturk, Reconfigurable Thermoforming Die Design and Manufacturing. MakinaTek. 122, 104-108, 2007. (In Turkish).

  13. Mesut Demirkırdı, Ilyas Kacar, Fahrettin Ozturk, What is Nanotechnology? Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Kayseri Branch. Machine Bulletin. 43, 21-26, 2006. (In Turkish).

  14. Mehmet Demirezen, Mustafa Bayrak, Fahrettin Ozturk, Investigation of the Effect Heat Treatment on Material Properties of DIN 41Cr4 and DIN 42CrMo4 Steels. Karabük University, Technical Education Faculty. The TEKNOLOJI. 9(2), 145-152, 2006. (In Turkish).

  15. Adem Cicek, Mahmut D. Mat, Tankut Yalcinoz, Fahrettin Ozturk, Investigation of Wind and Solar Energy Potentials of City of Nigde. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Kayseri Branch. Machine Bulletin. 39, 28-32, 2005. (In Turkish).


International Proceedings

  1. Suleyman Kilic, Ilyas Kacar, Fahrettin Ozturk, Mevlut Sahin, Oguz Erdem, Effects of Different Pre-Straining on Mechanical Properties of AA7075 Aluminum Alloys, The 18th International Conference on Machine Design and Production, 3-6 July, 2018, Eskişehir, Turkey.

  2. Suleyman Kilic, Fahrettin Ozturk, Oguz Erdem, Investigation of Aluminium Alloy 7075, 2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), October 25-27, 2017, Adana, Turkey.

  3. Suleyman Kilic, Fahrettin Ozturk, Performance Evaluations of Dynamic Flow Curve Models For TWIP900 Steel, 2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), October 11-13, 2017, Nevsehir, Turkey.

  4. Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan, Effects of the semi die/plug angles on cold tube drawing with a fixed plug by FEM for AISI 1010 steel tube, 4th International Symposium on Innovative Technologies in Engineering and Science (ISITES2016), November 3-5, 2016, Alanya/Antalya, Turkey.

  5. Suleyman Kilic, Fahrettin Ozturk, Evaluation of mathematical models performances in XRD Analysis for determination of volumetric ratios, 1st International Mediterranean Science and Engineering Congress, October 26-28, 2016, Adana, Turkey.

  6. Suleyman Kilic, Fahrettin Ozturk, Ilyas Kacar, Experimental and Finite Element Analysis of Erichsen Test for TWIP900 steel, 1st International Mediterranean Science and Engineering Congress, October 26-28, 2016, Adana, Turkey.

  7. Tianye Guo, Ana Bernal, Fahrettin Ozturk, Firas Jarrar, Jamal Y. Sheikh-Ahmad, Simulation of the Manufacturing Process of Mechanically Lined CRA Pipes, 24 International Conference on Materials and Technology (24 ICM&T), September 28-30, 2016, Portoroz, Slovenia.

  8. Remzi Ecmel Ece, Fahrettin Ozturk, Experimental Determination of Forming Limit Diagrams of Sheet Metal Titanium Alloys, The 17th International Conference on Machine Design and Production, July 12-July 15 2016, Bursa, Turkey. (In Turkish).

  9. F Ozturk, S Toros, Determination of Anisotropy Parameters via the Optimization Process of V-Bending, ASME 2015 International Mechanical Engineering Congress and Exposition, Volume 2A: Advanced Manufacturing, November 13-19, 2015, Houston, Texas, USA.

  10. Nuha Juneidi, Rania Asha, Firas Jarrar, Fahrettin Ozturk, Design of a Compact Heat Exchanger for Superplastic Forming, Advances in Materials and Processing Technology (AMPT2014), Atlantis, The Palm - November 17-20, 2014, Dubai, UAE.

  11. Fahrettin Ozturk, Prediction of Forming Limit Diagram Using M-K and Swift-Hill Models via Yield Criteria for TRIP800, Advances in Materials and Processing Technology (AMPT2014), Atlantis, The Palm - November 17-20, 2014, Dubai, UAE

  12. Ilyas Kacar, Fahrettin Ozturk, Firas Jarrar, Defects and Remedies in Advanced High Strength Steels Stamping, The 16th International Conference on Machine Design and Production, June 30-July 03 2014, Izmir, Turkey.

  13. Suleyman Kilic, Fahrettin Ozturk, Recent Trends of Application of Advanced High-Strength Steels in Automotive Industry to Enhance Sustainability, The 16th International Conference on Machine Design and Production, June 30-July 03 2014, Izmir, Turkey.

  14. Fahrettin Ozturk, Remzi Ecmel Ece, Naki Polat, Arif Koksal, Effects of Dwelling Time, Deformation Speed, and Pre-Straining on Springback Behavior of Ti-6Al-4V Alloy, 7th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS 20-23 JUNE 2013 Dedeman Hotel & Convention Center, Antalya, TURKEY.

  15. Ozgur Duygulu, Fahrettin Ozturk, Selda Ucuncuoglu, Gizem Oktay Secgin, Mustafa Yenice, Mesut Kaya, Warm Forming of Twin Roll Casted AZ31 Sheet for an Automotive Part, 9th International Conference on Magnesium Alloys and their Applications, July 8th-12th, 2012, Vancouver, Canada. (Poster).

  16. Aytekin Polat, Fahrettin Ozturk, Serkan Toros, The effects of strain rate and temperature on thermo mechanical properties of TRIP800 steel, International Iron and Steel Symposium, April 2-4, 2012 Karabuk University, Karabuk, Turkey.

  17. Serkan Toros, Fahrettin Ozturk, Prediction of Tensile Behaviors for TRIP800 Steel Using the Softening Model, International Conference on Materials Science and its Applications (ICMSA 2012), 13-15 February, 2012, Taif University, Kingdom of Saudi Arabia.

  18. F. Ozturk, R.E. Ece, N. Polat, A. Koksal, Tensile Properties of Titanium Alloys at Various Strain Rates, 6th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS 23-26 JUNE 2010 ATILIM University, Ankara, TURKEY.

  19. Fahrettin Ozturk, Zafer Evis, Serkan Toros, Finite Element Simulation of Diametral Strength Test of Hydroxyapatite, INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO Book Series: AIP Conference Proceedings, 1315, 259-264, 2010.
  20. Serkan Toros, Suleyman Kilic, Fahrettin Ozturk, The Effects of Material Thickness and Deformation Speed on Springback Behavior of DP600 Steel, Advances in Materials and Processing Technologies 2009 (AMPT2009), 26-29 October, 2009, Kuala Lumpur, Malaysia.

  21. F. Ozturk, M. A. Arslan, Analysis of Temperature Distribution on Warm Forming of Aluminum-Magnesium alloy, Advances in Materials and Processing Technologies 2009 (AMPT2009), 26-29 October, 2009, Kuala Lumpur, Malaysia.

  22. Fahrettin Ozturk, Naki Polat, Arif Koksal, Remzi Ecmel Ece, Effects of Warm Temperatures on Springback Behavior of Titanium Alloys, 5th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, 18-21 June 2009, Kuşadası, Turkey.

  23. Fahrettin Ozturk, Murat Dilmec, Mevlut Turkoz, Remzi E. Ece, Huseyin S. Halkaci, Grid Marking and Measurement Methods for Sheet Metal Formability, 5th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, 18-21 June 2009, Kuşadası, Turkey.

  24. Serkan Toros, Fahrettin Ozturk, Determination of Temperature and Strain Rate Depended Flow Stress Equation of Al-Mg Alloy, 5th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS, 18-21 June 2009, Kuşadası, Turkey.

  25. Fahrettin Ozturk, Serkan Toros, Suleyman Kilic, Evaluation of Tensile Properties of 5052 Type Aluminum-Magnesium Alloy at Warm Temperatures, 12th International Materials Symposium, Denizli, Turkey, 15-17 October 2008.

  26. M. Alkan, F. Ozturk, S. Toros, S. Kilic, Springback Evaluation Of 5052-H32 Aluminum-Magnesium Alloy, 9th International Conference on Technology of Plasticity (ICTP 2008), September 7-11 2008, Gyeongju, Korea. (Poster).

  27. F. Ozturk, S. Toros, H. Pekel, Tensile Properties Of 5754-O Type Aluminum-Magnesium Alloy At Cold And Warm Temperatures, 9th International Conference on Technology of Plasticity (ICTP 2008), September 7-11 2008, Gyeongju, Korea.

  28. Serkan Toros, Fahrettin Ozturk, Ilyas Kacar, Review of Warm Forming of Aluminium-Magnesium Alloys. 4th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS. 21-24 June 2007, Cesme, Turkey.

  29. Fahrettin Ozturk, Orhan Donmez, and Abdullah Sisman, Analysis of Temperature Effects on Formability of Al Alloys, Proceedings of the First Cappadocia International Mechanical Engineering Symposium. 14-16 July 2004, Cappadocia, Turkey.


National Proceedings

  1. Suleyman Kilic, Fahrettin Ozturk, The Future Trend of TWIP Steels In Automotive Industry, OTEKON 2016, 8th Automotive Technologies Congress, 23 - 24 May 2016, Bursa, Turkey. (In Turkish)

  2. IIyas Kacar, Ismail Durgun, Fahrettin Ozturk, The Effects of Vehicle Weight Reduction On Transportation CO2 Emission, OTEKON 2016, 8th Automotive Technologies Congress, 23 - 24 May 2016, Bursa, Turkey. (In Turkish)

  3. Ilyas Kacar, Fahrettin Ozturk, Roll Forming Applications for Automotive Industry, OTEKON 2014, 7th Automotive Technologies Congress, 26 - 27 May 2014, Bursa, Turkey.

  4. Mesut Kaya, Fahrettin Ozturk, Selda Uçuncuoglu, Gizem Oktay Seçgin, Ozgur Duygulu, Mustafa Mucahit Yenice, Investigation of Manufacturing Torpedo Traverse Pipe From AZ31 Sheet Material, OTEKON 2012, 6th Automotive Technologies Congress, 04 – 05 June 2012, Bursa, Turkey.

  5. Fahrettin Ozturk, Mesut Kaya, M. Mucahit Yenice, Investigation of Hot Formability for AZ31 Sheets, Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Bursa Branch. XII. Automotive and Manufacturing Technologies Symposium, 13-14 May 2011, Bursa, Turkey. (In Turkish)

  6. Emrah Uysal, Fahrettin Ozturk, An Application of Forming Limit Diagram Determination for High Strength Steel, Design-Manufacturing-Analysis Congress and CAD-CAM Days 2010 (TİMAK2010), Balıkesir, 11-12 November 2010. (In Turkish).

  7. Remzi Ecmel Ece, Fahrettin Ozturk, Investigation of the Use of Electrical Resistance Heating Method for Hot sheet Metal Forming Application, Design-Manufacturing-Analysis Congress and CAD-CAM Days 2010 (TİMAK2010), Balıkesir, 11-12 November 2010. (In Turkish).

  8. Hasan Demirtas, Fahrettin Ozturk, Mahmut Alkan, Investigation of the Effect of Interrupted Aging on Mechanical Properties for 6061 Alloy, 4. Aluminum Symposium, 14-16 October 2009, İstanbul, Turkey. (In Turkish).

  9. Fahrettin Ozturk, Serkan Toros, R. Ecmel Ece, Emre Esener, The Effect of Pre-Straining on Springback for 5083-H111 Alloy, 4. Aluminum Symposium. 14-16 October 2009, İstanbul, Turkey. (In Turkish).

  10. Fahrettin Ozturk, Serkan Toros, Emre Esener, Emrah Uysal, Investigation of High Strength Steels Usage in Automotive Industry, Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Bursa Branch. XI. Automotive Symposium. 8-9 May 2007, Bursa, Turkey. (In Turkish).

  11. Fahrettin Ozturk, Hakan Pekel, Lightweight Materials Usage and Development in Turkey, Çukurova University, 30.Year Symposia, 16-17 October, 2008. (In Turkish).

  12. Fahrettin Ozturk, Serkan Toros, Suleyman Kılıc, M. Hakan Bas, Variation of Springback with Temperature for 5083-H111 Aluminum Magnesium Alloy, Çukurova University, 30.Year Symposia, 16-17 October, 2008. (In Turkish).

  13. Fahrettin Ozturk, Determination of Forming Limit Diagrams of 5754-H40 Type Aluminum Alloy Using Analytical Models. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Konya Branch. IV. Machine Design and Manufacturing Technologies Congress. 24-25 November 2007, Konya, Turkey. (In Turkish).

  14. Ahu Fahriye Acar, Fahrettin Ozturk, Mustafa Bayrak, Investigation of Defects on Ring Carrier of Diesel Piston Manufacturing. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Konya Branch. IV. Machine Design and Manufacturing Technologies Congress. 24-25 November 2007, Konya, Turkey. (In Turkish).

  15. Hakan Pekel, Fahrettin Ozturk, Investigation of the Effect of Research and Development (R&D) Activities for Gaining Quality in Aluminum Sector. III. Aluminum Symposium. 16-17 November 2007, Tüsside-Gebze, Turkey. (In Turkish).

  16. Hakan Pekel, Fahrettin Ozturk, Investigation of the Effect of Lubrication on Formability of Aluminum Sheet Metal Forming. III. Aluminum Symposium. 16-17 November 2007, Tüsside-Gebze, Turkey. (In Turkish).

  17. Fahrettin Ozturk, Zafer Evis, Serkan Toros, Finite Element Simulation of Diametral Strength Test of Hydroxyapatite. 5. Turkey SIMULIA Abaqus User Conference. 8-9 November 2007, İstanbul, Turkey. (In Turkish).

  18. Hakan Pekel, Fahrettin Ozturk, Investigation of Hydroforming in Automotive Industry. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Bursa Branch. X. Automotive and Supplier Industry Symposium. 25-26 May 2007, Bursa, Turkey. (In Turkish).

  19. Serkan Toros, Fahrettin Ozturk, Aluminum-Magnesium Alloys in Automotive Industry and Investigation of Their Formability. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Bursa Branch. X. Automotive and Supplier Industry Symposium. 25-26 May 2007, Bursa, Turkey. (In Turkish).

  20. Ilyas Kacar, Mehmet Zile, Fahrettin Ozturk, Magnesium Alloys in Aerospace Industry. I. National Aviation and Space Symposium. 21-23 September 2006, Middle East Technical University, Ankara, Turkey. (In Turkish).

  21. Bulent Uzun, Fahrettin Ozturk, Progress in War Planes and No Pilot Airplane. VI. Aviation Symposium. 12-14 May 2006, Nevşehir, Turkey. (In Turkish).

  22. Mesut Demirkirdi, Ilyas Kacar, Fahrettin Ozturk, Recent Developments in Engineering Applications Using Nano Technology. VI. GAP Engineering Congress. 26-28 April 2006, Şanlıurfa, Turkey. (In Turkish).

  23. Ilyas Kacar, Fahrettin Ozturk, Recent Developments in Magnesium Alloys Formability. TİMAK-Design, Manufacturing, Analysis Congress. 26-28 April 2006, Balıkesir, Turkey. (In Turkish).

  24. Fahrettin Ozturk, Mahmut Alkan, S. Tan Akdogan, Zafer Yilmaz, Aziz Aydinc, Songul Citci, Long Term Internship in Engineering Education - University-Industry Relationship for Graduate Studies. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Ankara Branch. Engineering Education Symposium, 17-18 November 2005, Ankara, Turkey. (In Turkish).

  25. Fahrettin Ozturk, Orhan Donmez, The Effect of Deformation Speed on Formability for 5xxx Series Aluminum Alloys. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Konya Branch. III. Machine Design and Manufacturing Technologies Congress. 16-17 September 2005, Konya, Turkey. (In Turkish).

  26. Fahrettin Ozturk, Mahmut Alkan, S. Tan Akdogan, Zafer Yilmaz, Aziz Aydinc, Songul Citci, Investigation of the Relationship between University and Automotive Suppliers. Union of Chambers of Turkish Engineers and Architects (UCTEA) The Chamber of Mechanical Engineers Bursa Branch. IX. Automotive and Supplier Industry Symposium. 27-28 May 2005, Bursa, Turkey. (In Turkish).


Completed Thesis Under Supervision

Ph.D. Thesis:
  1. Experimental and Finite Element Analysis of Residual Stresses in Cold Tube Drawing with a Fixed Mandrel for AISI1010 Steel by Jabbar Kasim Jabbar Gattmah, Ankara Yildirim Beyazit University, Ankara, Turkey, May, 2017. (Co Advisor).

  2. Investigating the Effects of Twinning Mechanism on the Mechanical Properties of TWIP Steel  by Suleyman Kilic, Nigde University, Nigde, Turkey, April, 2016.

  3. Investigation of Formability and Modeling of TRIP800 Steel at Different Deformation Speed by Serkan Toros, Nigde University, Nigde, Turkey, August, 2013.

  4. Effect of  Sheet Thickness on Forming Limit Curve of 2024-T4 Aluminum by Murat Dilmec, Selcuk University, Konya, Turkey, January, 2012. (Co Advisor).

M.Sc. Thesis:

  1. Buckling and Fatigue Analysis of Mechanically Lined CRA Pipes by Jiansha Dong, The Petroleum Institute, Abu Dhabi, UAE, December, 2016.

  2. Effect of Cooling Methods on Weld Quality in Friction Stir Welding of AA2024-T351 by Marvene Xavier Fernandes, The Petroleum Institute, Abu Dhabi, UAE, October, 2016. (Co Advisor).

  3. Evaluation of the Gripping Force of Mechanically Lined CRA Pipe by Tianye Guo, The Petroleum Institute, Abu Dhabi, UAE, October 2016.

  4. Design, Fabrication, and Commissioning of Apparatus for Superplastic Forming Tests by Zemin Li, The Petroleum Institute, Abu Dhabi, UAE, May 2016. (Co Advisor).

  5. Formability Improvement of Titanium Sheet Materials with Electrical Heating Method by Remzi Ecmel Ece, Nigde University, Nigde, Turkey, May 2011.

  6. Investigation of Forming Limit Diagram for DP600 Steels Based on Deformation Speed and Sheet Thickness by Emrah Uysal, Nigde University, Nigde, Turkey, May 2011.

  7. Investigation of Using Biaxial Stretch Test Data for Finite Element Codes of Sheet Metal Forming by Emre Esener, Nigde University, Nigde, Turkey, June 2010.

  8. Modeling of Mechanical Behaviors of Aluminum-Magnesium (Al-Mg) Alloys at Various Temperatures and Deformation Speeds by Serkan Toros, Nigde University, Nigde, Turkey, July 2009.

  9. Investigation of Springback Behavior of DP600 Steel by Suleyman Kilic, Nigde University, Nigde, Turkey, July 2009.

  10. Effects of Temperature and Tensile Velocity on Sheet Metal Formability of AA 5754-O by Hakan Pekel, Selcuk University, Konya, Turkey, February 2008. (Co Advisor).

  11. Design and Manufacturing of Canopy for T-37 Aircraft by Bulent Uzun, Nigde University, Nigde, Turkey, April 2006.